Articles tagged with: neck set
Workshop »
A little ways back, I discussed the removal of an acoustic guitar’s neck for repair. I also talked a little about my opinions on the construction of that particular guitar. The neck-removal post was getting a little long so I decided to split out the reassembly part.
Putting an acoustic guitar back together generally involves some glueing. Sometimes more and sometimes less.
A bolt-on neck will generally just require that the fingerboard extension (the part past where the neck meets the body) be glued to the guitar top while the bolts inside …
Workshop »
In a previous post, I gave my opinion on what I saw as the problems with the neck-joint design of a guitar I’d recently worked on. I thought you might be interested in some more detail about that repair (without my whinging about design issues). While some of the steps undertaken in this repair are common with any job that involves removing a guitar’s neck, you might find it useful to, first, check out some of the ways in which this guitar differed.
The guitar had taken a knock and its …
Featured, Workshop »
I should definitely preface this post by stating that what follows is my opinion only. It may be that I’m alone in these views or it may be that other guitar builders and repair-techs agree. The post below, however, is my take on things.
I recently had a Tanglewood TW130 through the shop for repair. It’s a nice little acoustic—I’ve always been a sucker for all-mahogany acoustics. The guitar had taken a fall and the heel had come away from the body. I’ll detail the steps taken to assess and repair …
Featured, Guitar 101, Workshop »
What the hell is a neck reset and why the hell would you want one?
You’ll often hear talk about neck resets (or sometimes, neck sets) but the reasons it’s required are often glossed over by saying it’s just something that acoustics need sometimes. It’s all pretty simple and it has to do with geometry (stay with me…) and wood.
Huh?
Let me try to make a little sense of that.
Why would I need a neck reset?
When an acoustic guitar is made, it is designed and constructed such that the guitar’s string height …
Read the full story »
